Make your car Faster Better Greater
(07) 3568 4951
Make your car Faster Better Greater
Make your car Faster Better Greater
(07) 3568 4951

Diesel Turbo Upgrades: VNT vs Gated, Turbo Sizes and What You Need

FLEX PRO F66 56MM Turbo
When a turbo upgrade makes sense on a diesel ute or 4WD, how VNT and gated turbos differ, what turbo sizes mean and the parts you need alongside it.

Diesel turbo upgrades are the step that takes a tuned ute or 4WD past what the factory turbo can deliver. Once a tune has used up the factory turbo’s airflow, a larger turbo is the only way to add more air, and more air is what lets the engine burn more fuel cleanly.

This guide covers when a turbo upgrade makes sense, VNT vs gated turbos, what the sizes mean, the parts you need alongside it, and links to our detailed guide for each engine.

PPRC 44mm turbo, a popular choice for diesel turbo upgrades on the 1KD Hilux and 4JJ1 D-Max
The PPRC 44mm turbo suits the 1KD Hilux and 4JJ1 D-Max and Colorado.

How a turbo makes more power

A turbo uses exhaust gas that would otherwise go out the tailpipe. The gas spins a turbine wheel, which drives a compressor wheel on the same shaft. The compressor pushes air into the engine under pressure, so more air fits into each cylinder. Compressing air heats it, so an intercooler cools it on the way in, making it denser again. The turbocharger page on Wikipedia covers the basics in more detail.

A diesel’s power is set by how much fuel it can burn, and it needs plenty of air to burn that fuel cleanly. Add fuel without enough air and you get smoke and high exhaust temperatures. That’s why the turbo, not the injectors, is usually the first limit a tuned diesel hits.

When does a turbo upgrade make sense?

On most common-rail utes, a tune and supporting parts get you to around 200HP on the factory turbo. Past that, the factory turbo runs out of airflow. Pushing it harder raises exhaust temperatures and shortens its life.

A turbo upgrade makes sense when:

  • You want to go beyond what a tune and factory turbo can give
  • Your factory turbo has failed and you’re replacing it anyway
  • You tow heavy and want lower exhaust temperatures under load

At its limit, or failing?

It helps to know which situation you’re in, because the checks before an upgrade are different.

Factory turbo at its limitFactory turbo failing
Power fades near the top of each gearBlue or grey smoke
Exhaust temps climb fast when towingOil in the intercooler pipes
Tune backed off to protect the engineWhine, siren noise or shaft play
Engine otherwise healthyLoss of boost or boost fault codes

A turbo at its limit is a performance decision. A failing turbo needs a diagnosis first, because the cause, often oil supply, has to be fixed or the new turbo goes the same way.

When it doesn’t make sense

A turbo upgrade isn’t always the answer. If the ute is mostly unladen and you’re happy with a tune, the factory turbo may be enough. If the budget doesn’t stretch to the tune and supporting parts, the turbo won’t deliver what you paid for.

And if the vehicle feels flat because of a boost leak, a clogged intake, failing injectors or a blocked DPF, a new turbo won’t fix it. We test for those first, and if a tune or a repair is all the vehicle needs, we’ll tell you.

VNT vs gated turbos

VNT (variable nozzle turbine) turbos use moving vanes to control boost. They spool early and give strong low-down torque, which suits towing and off-road driving. Most modern factory diesel turbos are VNT.

Gated (wastegate) turbos use a wastegate valve to control boost. They’re simple and robust and can support big power, but they need a tune set up for wastegate boost control.

Some turbos are built as direct replacements that keep the factory boost control, which keeps installation simpler. Others need tuning after fitting.

VNT vs gated turbo comparison for diesel utes and 4WDs

How each one controls boost

In a VNT turbo, a ring of vanes surrounds the turbine wheel. At low revs the vanes close, speeding up the exhaust gas so the turbine spins up early. At higher revs they open to let more gas through and stop boost climbing too far. The ECU moves the vanes through an actuator, so boost can be adjusted continuously as revs and load change.

In a gated turbo, exhaust always flows through a fixed turbine housing. Once boost reaches the target set in the tune, the wastegate opens and lets some exhaust bypass the turbine. Fewer moving parts sit in the hot exhaust stream, which is part of why a gated turbo suits big power.

Which suits you?

A VNT turbo suits most utes and 4WDs that tow, tour or work off-road, because response down low matters more than peak power. A gated turbo suits builds chasing bigger numbers, where the tune can make the most of a larger turbine and compressor. For towing with a big power target, a ball bearing VNT or a well-matched gated turbo with a good tune can both work.

What the turbo size means

Diesel turbos are usually described by compressor wheel size, such as 44mm or 56mm. A bigger compressor moves more air and supports more power, but takes longer to spool.

  • 44mm: a common step up for the 4JJ1, 1KD and 4JJ3. It’s the turbo size in our 250HP packages for the Isuzu D-Max and Toyota Hilux.
  • 48.5mm to 56mm: larger builds for higher power, such as the Flex Pro F66 range for the 4JJ1, 4JJ3 and 1KD.

Ball bearing turbos spool faster than journal bearing turbos of a similar size, which helps low-down response.

Bearings: journal or ball bearing

In a journal bearing turbo, the shaft spins on a thin film of oil inside plain bushes. It’s simple and durable, but the oil film adds drag at low shaft speeds. A ball bearing turbo carries the shaft on a ball bearing cartridge, which cuts that drag so the turbo spins up sooner. Both types depend on a clean, steady oil supply.

The turbine side matters too

The compressor gets the attention, but the turbine wheel and housing decide how quickly the turbo spools and how much back pressure the engine sees. A small turbine spools quickly but can build too much back pressure at high revs, while a large turbine flows freely but can feel lazy down low. Good aftermarket turbos match both sides for a particular engine and use, which is why we recommend turbos by engine rather than by size alone.

Direct-fit or performance turbo?

Turbo upgrades fall into two broad groups, and knowing which one you’re looking at saves surprises at fitting time.

Direct-fit upgrades replace the factory turbo on the same mounts and lines and keep factory-style boost control. The Garrett PowerMax range is an example: the 70 Series version runs on the factory ECU, and the GTB2256V for the 1KD reuses the factory mounts, oil lines and coolant lines. The Flex Pro-44 keeps factory geometry. These suit owners who want more airflow without changing how the vehicle drives.

Performance turbos move more air again, and some need extra parts such as a dump pipe, intake pipe or oil lines. Gated turbos always need a tune for boost control. They suit builds where the tune, fuel and driveline are all being upgraded together.

Neither is better across the board. The right one depends on the engine, the power target and how much of the vehicle you’re prepared to change.

Diesel turbo upgrades by engine

We have a detailed guide for each engine we work on most:

EngineVehiclesGuide
Isuzu 4JJ1D-Max, MU-X, Rodeo, RC Colorado4JJ1 turbo upgrade
Isuzu 4JJ1 (DPF)2017 to 2020 D-Max, MU-XDPF 4JJ1 turbo upgrade
Isuzu 4JJ32020+ D-Max, MU-X, BT-504JJ3 turbo upgrade
Isuzu 4JJ1 replacement2012 to 2016 D-MaxD-Max turbo replacement
Toyota 1KDN70 Hilux, Prado1KD turbo upgrade and Garrett GTB2256V
Toyota 1GD2015 to 2020 N80 Hilux1GD Hilux turbo upgrade
Toyota 1VD70 Series LandCruiserGarrett PowerMax 70 Series
Toyota 1HZ70, 80 and 105 Series1HZ turbo

For a brand view, see our guide to Flex turbos, which covers every Flex model we stock.

Popular turbo upgrades

See the full range in our turbos category.

Diesel turbo upgrades on DPF engines

Many late-model utes have a diesel particulate filter, and it stays on the vehicle. Removing a DPF or EGR system on a road vehicle isn’t legal in Australia, and we don’t do it. There are turbos built to work with DPF engines, such as the Flex F55 Pro for the 4JJ3 and DPF 4JJ1, and the Desta 44mm PPRC turbo for the 2017 to 2019 DPF 4JJ1.

A healthy DPF matters more once the turbo is upgraded. A partly blocked DPF raises exhaust back pressure, which costs power and puts extra heat through the turbo. If yours is regenerating often or showing warnings, sort it before or alongside the turbo upgrade.

Matching the turbo to how you use the vehicle

UseWhat to look forExamples
Heavy towingVNT or ball bearing, early spoolFlex Pro-44, Flex PRO VNT
TouringFactory-style fit, more airflowGarrett PowerMax range
Daily and weekend44mm, good all-roundR31 Pro V2, PPRC 44mm
High power48.5mm to 56mmFlex Pro F66

Size the turbo for how the vehicle spends most of its time. A turbo picked for a big dyno number will feel lazier day to day on a ute that mostly tows.

Supporting parts for diesel turbo upgrades

A bigger turbo works best as part of a matched setup.

  • Tune. Gated turbos need tuning for boost control, and every turbo upgrade needs a tune to add fuel to match the extra air. See custom dyno tuning.
  • Intercooler. More boost means hotter intake air. A front mount intercooler brings it back down.
  • Airbox and exhaust. The engine needs to breathe in and out freely to use the bigger turbo.
  • Injectors. Past a certain point, more air needs more fuel. Read about high flow diesel injector upgrades.
  • Clutch or transmission. More torque needs a stronger clutch, or cooling and transmission upgrades on autos.
Checklist of supporting parts to plan with a bigger diesel turbo

If you’re starting from stock, a power package covers all of this in one visit. See our drive in, drive out packages.

Aftermarket turbo installation

A turbo upgrade involves more than swapping the turbo. Oil feed and drain lines, coolant lines, gaskets, intercooler piping and, for gated turbos, boost control all need to be right. Oil supply problems are one of the main causes of turbo failure, so installation should be done carefully.

Our workshop fits turbo upgrades and tunes them on the dyno, either on their own or as part of a power package. For help deciding if the job is worth it on your vehicle, read when an aftermarket turbo upgrade is worth the installation.

How a turbo job runs at our workshop:

  1. Scan for codes, road test and pressure test the intake for boost leaks.
  2. Check injectors and the intake, so the new turbo isn’t fitted to a hidden fault.
  3. Remove the old turbo and inspect the oil feed, drain and manifold.
  4. Fit the new turbo with new gaskets, and any dump pipe or intake parts it needs.
  5. Prime the oil feed before first start, then check for oil, coolant and boost leaks.
  6. Tune on the dyno and road test under load.

Oil supply and break-in

The new turbo needs a clear oil feed and a drain that flows freely back to the sump. A restricted drain can push oil past the turbo seals and look like a failed turbo. Fresh oil and a new filter at fitting give it a clean start.

For the first drives, let the engine warm up before using full boost. After a hard tow, let it idle briefly before switching off so the turbo cools with oil still flowing.

What a good result looks like

After the tune, a well-matched turbo upgrade should show:

  • Boost reaching target smoothly, without spikes or hunting
  • No visible smoke under hard acceleration once the engine is warm
  • Exhaust temperatures that level off on a long climb rather than climbing endlessly
  • No oil weeping around the feed, drain or intercooler joins
  • No fault codes or warning lights

We recommend a short follow-up check after a few weeks of normal driving to re-check clamps, look for leaks and scan for codes.

6 common turbo upgrade mistakes to avoid

  1. Fitting a turbo without a tune. The engine won’t add fuel to use the extra air, and a gated turbo has no proper boost control.
  2. Going too big for how you drive. A large turbo on a towing ute gives away the low-down response you need.
  3. Skipping the checks. Boost leaks, failing injectors or a clogged intake will undo the upgrade.
  4. Ignoring the oil supply. A blocked feed or restricted drain kills new turbos quickly.
  5. Forgetting the driveline. A factory clutch or a hot automatic won’t cope with a big torque increase.
  6. Deleting emissions equipment. It isn’t legal on a road vehicle, and there are turbos built to work with the DPF.

Planning and budget

There’s no single price for diesel turbo upgrades, because the turbo is only part of the job. The quote depends on the turbo, the fitting, the tune and the supporting parts your vehicle doesn’t have yet.

A ute that already has a tune, intercooler and exhaust needs less than one that’s stock. We check the vehicle, tell you what it needs now and what can wait, and quote it as one job so nothing is missed.

FAQs

Will a bigger turbo cause lag?

A much larger turbo will spool later. Matching the size to your use, and choosing a VNT or ball bearing turbo, keeps response strong for towing and off-road driving.

Do I need a tune after a turbo upgrade?

Some direct replacement turbos keep factory boost control and don’t require tuning for the turbo itself. To get the extra power, though, the engine needs a tune to add fuel.

Can I keep my DPF with a turbo upgrade?

Yes. There are turbos and conversions built for DPF engines, such as the Flex F55 Pro for the 4JJ3 and DPF 4JJ1.

How much power can I make on the factory turbo?

On most common-rail utes, a tune and supporting parts get you to around 200HP on the factory turbo. Past that, a bigger turbo is the next step.

Will a turbo upgrade lower exhaust temperatures?

It can. A turbo that isn’t working at its limit puts less heat into the intake air and lets the engine burn its fuel more completely. That’s why heavy towers often see lower exhaust temperatures under load after the upgrade, provided the tune is set up for it.

Does a turbo upgrade raise my towing capacity?

No. Towing capacity, GVM and GCM are set by the manufacturer. More power makes towing easier within those limits, not beyond them. Check your rig against the vehicle’s ratings before a big trip.

Can I fit a turbo upgrade myself?

Some turbos are bolt-on, but oil priming, leak checks and the tune all need to be right. We recommend having the turbo fitted where it will be tuned, so any problem shows up on the dyno rather than on the highway.

Ball bearing or journal bearing?

A ball bearing turbo spools faster than a journal bearing turbo of a similar size, which helps towing. Both last when they get clean oil and aren’t overheated.

Book a turbo upgrade in Brisbane

Desta Automotive is a diesel performance workshop at 34-38 Railway Tce, Rocklea. We supply, fit and dyno tune diesel turbo upgrades for the D-Max, MU-X, Hilux, Prado, LandCruiser and more. Get a quote or book online or call (07) 3568 4951.

0